Kunshan Jeppesen Automation Equipment Co., Ltd.
Contact: Mr. Zhu
Service Tel: 18051046286
Address: Kunshan City, Jiangsu Province, Wusong Jiang Road 6-2
1) into the line wheel: wire delivery and stripping thread. When stripping the stub, both stripping the head and stripping the tail (the line length is less than 50mm), stripping stripping in addition to stripping head, but also have the function of stripping the middle of several. Power cord stripping machine
2) outlet wheel: wire delivery and stripping line tail. (Stripping machine in the computer stripper no effect, to make the line out of the gap in the maximum position)
3) into the line wheel gap adjustment wheel: adjust the line into the wheel gap, right to move the gap increases, the forward clearance is reduced (according to the thickness of the wire to adjust).
4) into the wheel pressure regulating wheel: adjust the pressure into the spool, pull out clockwise after the rotation, into the spool pressure increases, pulled out counterclockwise rotation, into the spool pressure decreases. (According to the strength of the wire sheath to determine, that is, the difficulty of stripping the skin, the pressure is difficult, the pressure is easy to reduce)
5) Line wheel gap adjustment wheel: Adjust the line wheel gap, the forward clearance increases, to the right to reduce the gap (according to the thickness of the wire to adjust).
6) The power cord stripping machine outlet wheel pressure adjustment knob: adjust the outlet wheel pressure, pulled out after counterclockwise rotation, the outlet wheel pressure increases, pulled out clockwise rotation, into the spool pressure decreases. (According to the wire sheath strength to determine, that is, the difficulty of stripping the skin, the pressure is difficult to increase, easy to reduce the pressure)
7) Turret assembly: Wire cutting, stripping and stripping, down state, the upper and lower blades to be opened to the maximum, so that the smooth passage of wire.